Showing 49–60 of 239 results
-
| Model |
Square Drive |
Min Torque (Nm) |
Max Torque (Nm) |
Length A (Without Square Drive) (mm) |
Height B (Overall) (mm) |
Diameter C (Gear Holding) (mm) |
Diameter D (Gear Box) (mm) |
Weight (Without DMA) (kg) |
Gang 1 (idlingSpeed) (rpm) |
Gang2 (Idling Speed) (rpm) |
| 3/4″ |
20 |
450 |
300 |
270 |
78.0 |
77.0 |
4.9 |
18.0 |
54.0 |
| 3/4″ |
50 |
800 |
300 |
270 |
78.0 |
77.0 |
5.2 |
9 |
27 |
| 1° (3/4″) |
100 |
1500 |
345 |
270 |
78.0 |
77.0 |
6.1 |
5 |
15 |
| 1° |
200 |
3000 |
345 |
270 |
78.0 |
77.0 |
6.2 |
2.5 |
7.5 |
|
300 |
4500 |
405 |
270 |
78.0 |
90.0 |
8.9 |
1.5 |
4.5 |
| 1¹/” |
400 |
6000 |
420 |
270 |
78.0 |
102.0 |
11.0 |
1 |
3 |
| Model |
Square Drive |
Min Torque (Nm) |
Max Torque (Nm) |
Length A (Without Square Drive) (mm) |
Height B (Overall) (mm) |
Height C Without Square (mm) |
Diameter D (Gear Box) (mm) |
Weight (Without DMA) (kg) |
Gang 1 (Idling Speed) (rpm) |
Gang2 (Idling Speed) (rpm) |
| 3.4″ |
20 |
450 |
315 |
270 |
200 |
77.0 |
6.8 |
18.0 |
54.0 |
| 3.4″ |
50 |
800 |
315 |
270 |
200 |
77.0 |
7.1 |
9 |
27 |
| 1″(3/4″) |
100 |
1500 |
315 |
270 |
243 |
77.0 |
8.0 |
5 |
15 |
| 1″ |
200 |
3000 |
315 |
270 |
243 |
77.0 |
8.1 |
2.5 |
7.5 |
| 1″ |
300 |
4200 |
315 |
270 |
280 |
90.0 |
10.1 |
1.5 |
4.5 |
| 115″ |
300 |
4500 |
315 |
270 |
305 |
90.0 |
10.8 |
1.5 |
4.5 |
| 114″ |
400 |
6000 |
315 |
270 |
315 |
102.0 |
12.9 |
1 |
3 |
-
TECHNICAL PARAMETERS:
| Model |
AEC-150 |
| Max. Opening Distance |
154mm (5.9in) |
| Rated Working Pressure |
720 bar (10440psi) |
| Q235 Material Diameter |
30mm (circle steel) |
| Max. Cutting Force |
670 KN |
| Weight |
20 kg (44lbs) |
| Dimension (L*W*H) |
838*215*279mm |
-
TECHNICAL PARAMETERS:
| Model |
AEC-150 |
| Max. Opening Distance |
650mm (25.5in) |
| Rated Working Pressure |
720 bar (10440psi) |
| Rated Tension Force |
47 KN |
| Rated Pulling Force |
43 KN |
| Pulling Distance |
520mm (20.4in) |
| Weight |
24.8 kg (include Battery) |
| Dimension (L*W*H) |
905*350*279mm |
-
| Model |
AB-DCL-T |
| Electric power |
1000 W |
| Voltage |
AC 220-240V50Hz/60Hz |
| Auto Adjustment |
50% – 100% |
| Electric current |
2.3-4.5A (Auto) |
| Temperature Scope |
0-180 Degree C |
| Time Scope |
0-99*59 Min |
| Max. Outside Diameter |
260 mm |
| Inner Diameter |
20-120 mm |
| Max. Bearing Weight |
15 Kg |
| Residual Magnetic |
Less than 2 A/c |
| Induction Heated Head size |
Dia 177x200xf 19mm |
| Dimension/Net Weight |
400x210x300 mm/3 Kg |
| Demagnetization |
Auto |
| Coils Cooling Method |
Force-Air Cooling |
| Control Panel |
Digital Display |
| Out Shell Meterial |
ABS Composite material |
-
| Model |
AB-RJZC-220 |
AB-RMD-480 |
| Power (KVA) |
2.5 |
3.6 |
| Voltage (V) |
220 |
220 |
| Electric current (A) |
10 |
16 |
| Frequency (HZ) |
50 |
50 |
| Rotating Device |
No |
No |
| Pole Section |
40×40 |
60×60 |
| Max Bearing Weight (kg) |
15 |
24 |
| Inside Diameter (mm) |
15-140 |
30-300 |
| Max. Outside Diameter (mm) |
220 |
480 |
| Max Width (mm) |
95 |
180 |
| Temperature Control |
Yes |
Yes |
| Temperature |
0-270 |
0-270 |
| Temperature Magnetic Wand |
v |
v |
| Digital Display |
v |
v |
| Time Setting |
v |
v |
| Longest Time (s) |
0-999 |
0-999 |
| Sound Prompt |
v |
v |
| Error Display |
v |
v |
| Automatic Stay Warm |
v |
v |
| Automatic Demagnetization |
Yes |
yes |
| Size |
240x200x240 |
460x210x260 |
| heating Rod Size and Quantity |
10,14,20,30 |
20,30,40,50,60 |
| Pillar Extension Rod |
Custom |
Custom |
| Total Weight (kg) |
70 |
83 |
| Alarm Prompt |
v |
v |
-
| Model |
AB-RJZC-1 |
AB-RJZC-2 |
AB-RJZC-4 |
| Electric Power (KVA) |
1 |
3.6 |
8 |
| Voltage (V) |
220 |
220 |
380 |
| Frequency (HZ) |
50 |
50 |
50 |
| Electric Current (A) |
6 |
16 |
20 |
| Max. Bearing Weight (Kg) |
10 |
35 |
75 |
| Inside Diameter (mm) |
15-100 |
28-160 |
35-250 |
| Max. Outside Diameter (mm) |
150 |
340 |
480 |
| Max. Width (mm) |
60 |
140 |
210 |
| Tallest temperature |
270 °C |
270 °C |
270 °C |
| Heating Rod Size |
10,20,40 |
20,30,40,50,60 |
30,40,50,70 |
| Weight (Kg) |
11 |
63/65 |
103 |
-
| Model |
AB-RJZC-5 |
AB-RJZC-6 |
AB-RJZC-6A |
AB-RJZC-7 |
AB-RJZC-8 |
| Electric Power (KVA) |
12 |
24 |
24 |
40 |
95 |
| Voltage (V) |
380 |
380 |
380 |
360 |
380 |
| Frequency (HZ) |
50 |
50 |
50 |
50 |
50 |
| Electric Current (A) |
30 |
60 |
60 |
100 |
240 |
| Max. Bearing Weight (Kg) |
150 |
250 |
350 |
750 |
Customized |
| Inside Diameter (mm) |
45-400 |
85-400 |
85-400 |
85-500 |
145-600 |
| Max. Outside Diameter (mm) |
700 |
900 |
1000 |
1400 |
2500 |
| Max. Width (mm) |
310 |
320 |
360 |
420 |
700 |
| Tallest temperature |
270 °C |
270 °C |
270 °C |
270 °C |
270 °C |
| Heating Rod Size |
30,40,60,80 |
40,60,80 |
60,80,100 |
60,80,100,150 |
100,150,200,240 |
| Weight (Kg) |
230 |
320 |
350 |
660 |
2350 |
-
TECHNICAL PARAMETERS:
| Model |
AR-1230 |
| Rated Working Pressure |
720 bar (10440psi) |
| Max. Lifting Force |
156KN |
| Telescopic Length |
490mm (19.3in) |
| Spread Distance |
2x245mm |
| Contraction Extension Length |
740-1230mm (29-48in) |
| Weight |
=18.5kg |
| Dimension (L*W*H) |
740*200*110mm |
-
| Model Number |
Capacity |
Stroke |
Min. Height |
Max. Height |
Head Screw |
Weight |
|
|
|
Ton |
(mm) |
(mm) |
(mm) |
mm |
Kg |
|
| ABJ-02 |
2 |
165 |
180 |
345 |
50 |
2.29 |
|
| ABJ-03 |
9 |
173 |
191 |
364 |
60 |
2.79 |
|
| ABJ-05 |
5 |
188 |
200 |
388 |
70 |
3.79 |
|
| ABJ-08 |
8 |
192 |
200 |
392 |
70 |
5.69 |
|
| ABJ-12L |
12 |
163 |
177 |
340 |
76 |
6.58 |
|
| ABJ-12 |
12 |
225 |
241 |
466 |
79 |
7.68 |
|
| ABJ-20L |
20 |
122 |
183 |
305 |
38 |
8.98 |
|
| ABJ-20 |
20 |
158 |
271 |
429 |
– |
11.97 |
|
| ABJ-30 |
30 |
159 |
281 |
440 |
– |
17.96 |
|
| ABJ-50H |
50 |
180 |
300 |
480 |
– |
35.24 |
|
| ABJ-100H |
100 |
150 |
310 |
460 |
– |
90.2 |
|
|
|
|
-
| Capacity (ton) |
Type Cylinder Used |
Stroke (mm) |
Cylinder Model |
Model No. |
Speed Advance |
Pressing |
Type Pump |
Pump Model |
Weight (kg) |
|
|
| 25 |
Single Acting |
159 |
ARC-256 |
APM256C |
3.3mm /stroke |
0.8mm /stroke |
Hand |
P-109 |
108 |
|
|
|
-
Feauters
These cylinders are particularly suitable for applications in which the load has to be supported for long periods. The lock nut can be screwed down onto the cylinder body to hold the load mechanically. This ensures that it’s absolutely safe to operate under load.
CGG cylinders have concentric grooves machined on the end of the rod to improve the load grip, models above 30 ton have lifting eyelets to facilitate their transport.
From 50 ton upwards, the cylinders are plunging type (P version) and have a system which prevents any possible over-stroke. The rod has a coloured zone which becomes visible 10 mm before the end of the piston stroke.
All models can operate with off-centred load up to 8% of their nominal capacity.
OPERATIONAL AREAS
The ideal use for these cylinders is in the Construction Industry for example, bridge repairs and constructions and in the building and maintenance of heavy structural works. The anti-corrosion treatment applied to these cylinders makes them suitable for use in harsh and adverse environments.
OPTIONS:
– T version, cylinder with integrated tilt saddle.
– F version, cylinder with mounting holes for fixing purposes at the bottom.
– N version, (optional starting from 50 t) cylinders with end of stroke ring nut.
This version is in compliance with ANSI B30.1.
– M version, cylinder with spring return.
This version is available for N – version cylinders up to 150 tons (i.e., CMG50N100).
ACCESSORIES:
– ZTT tilt saddle reduces the effects of any possible off-centred load.
-
Feauters
These cylinders are particularly suitable for applications in which the load has to be supported for long periods. The lock nut can be screwed down onto the cylinder body to hold the load mechanically. This ensures that it’s absolutely safe to operate under load.
CGG cylinders have concentric grooves machined on the end of the rod to improve the load grip, models above 30 ton have lifting eyelets to facilitate their transport.
From 50 ton upwards, the cylinders are plunging type (P version) and have a system which prevents any possible over-stroke. The rod has a coloured zone which becomes visible 10 mm before the end of the piston stroke.
All models can operate with off-centred load up to 8% of their nominal capacity.
OPERATIONAL AREAS
The ideal use for these cylinders is in the Construction Industry for example, bridge repairs and constructions and in the building and maintenance of heavy structural works. The anti-corrosion treatment applied to these cylinders makes them suitable for use in harsh and adverse environments.
OPTIONS:
– T version, cylinder with integrated tilt saddle.
– F version, cylinder with mounting holes for fixing purposes at the bottom.
– N version, (optional starting from 50 t) cylinders with end of stroke ring nut.
This version is in compliance with ANSI B30.1.
– M version, cylinder with spring return.
This version is available for N – version cylinders up to 150 tons (i.e., CMG50N100).
ACCESSORIES:
– ZTT tilt saddle reduces the effects of any possible off-centred load.
